Specifically designed for use on stamped concrete, GFRC, GRG, concrete countertops, pavers and natural stone to provide stain protection by penetrating and chemically reacting with the natural materials found in concrete and stone.
BENEFITS OF USE
- Permanent part of the surface
- Will not chip or peel
- Breathable / will not white out from trapped moisture
- UV resistant / won’t yellow with exposure to sunlight
- Resistant to all common staining agents
- Easy application
- Color enhancing / natural finish
- Thin build, high performance
Surface must be clean, free of dust, dirt, mildew, oil, grease, paint, sealers, curing agents, waxes, and surface contamination. An extremely dense surface is required for proper performance.
MIXING MATTE STAMPSHIELD
Thoroughly mix the full contents of the pail, including the matting agent at the bottom before using. Matte Stampshield appears reddish in the pail.
Professional use only. Stampshield can be brushed or rolled, but for best results and to avoid over application, it is recommended to be sprayed on using a high quality pump up sprayer with Viton seals and a fine to medium tip.
It is important to not over apply Stampshield so that it remains breathable; the best way to ensure correct application is to apply two thin coats. First coat should color enhance most of the surface but leave no shine. The second coat will even out the surface to a uniform color enhanced look with no to a very slight sheen.
TEMPERATURE / CURE RATE
Do not apply Stampshield in temperatures under 4°C or above 35°C
Waterproof in 10 minutes
Walkable in 30 minutes
Traffic within two hours
Blush: 4 hr dry / 24 hr immersion does not blush
Adhesion: D-33598 Excellent
Water beading: beads water
QUV G-53 250 hrs: no blistering, no yellowing
Abrasion resistance: D-460 20 mg loss
Chemical resistance (12 hour covered) D-1308-87: Transmission fluid: no effect
Gasoline: softens, recovers
Formula 409: no effect
Motor oil: no effect
Brake fluid: softens, recovers
10% hydrochloric acid: no effect
10% sulfuric acid: no effect
Red wine: no effect
Vinegar: blemish, repairable
Pencil hardness: D-3363 6H
Hot tire pick-up: passed
Mechanical stability: excellent
Light stability: excellent UV exposure shows no degradation
Meets ADA coefficient of friction standards (ASTM F1677) 0.55-0.69 for standard and 0.70-0.82 (ASTM-C779) for anti-skid version
COVERAGE / YIELD
Application rates vary from 37 sq mtrs / 4.54ltrs on reseals and power troweled concrete to 14 sq mtrs / 4.54ltrs on porous concrete.
Shelf Life: 1 year
Storage: Store away from open flames and below temperatures of 38°C
Volume: 22.7 Litres